Estimation of the conditional independence graph (CIG) of high-dimensional multivariate Gaussian time series from multi-attribute data is considered. Existing methods for graph estimation for such data are based on single-attribute models where one associates a scalar time series with each node. In multi-attribute graphical models, each node represents a random vector or vector time series. In this paper we provide a unified theoretical analysis of multi-attribute graph learning for dependent time series using a penalized log-likelihood objective function formulated in the frequency domain using the discrete Fourier transform of the time-domain data. We consider both convex (sparse-group lasso) and non-convex (log-sum and SCAD group penalties) penalty/regularization functions. We establish sufficient conditions in a high-dimensional setting for consistency (convergence of the inverse power spectral density to true value in the Frobenius norm), local convexity when using non-convex penalties, and graph recovery. We do not impose any incoherence or irrepresentability condition for our convergence results. We also empirically investigate selection of the tuning parameters based on the Bayesian information criterion, and illustrate our approach using numerical examples utilizing both synthetic and real data.

Estimation of differences in conditional independence graphs (CIGs) of two time series Gaussian graphical models (TSGGMs) is investigated where the two TSGGMs are known to have similar structure. The TSGGM structure is encoded in the inverse power spectral density (IPSD) of the time series. In several existing works, one is interested in estimating the difference in two precision matrices to characterize underlying changes in conditional dependencies of two sets of data consisting of independent and identically distributed (i.i.d.) observations. In this paper we consider estimation of the difference in two IPSDs to characterize the underlying changes in conditional dependencies of two sets of time-dependent data. Our approach accounts for data time dependencies unlike past work. We analyze a penalized D-trace loss function approach in the frequency domain for differential graph learning, using Wirtinger calculus. We consider both convex (group lasso) and non-convex (log-sum and SCAD group penalties) penalty/regularization functions. An alternating direction method of multipliers (ADMM) algorithm is presented to optimize the objective function. We establish sufficient conditions in a high-dimensional setting for consistency (convergence of the inverse power spectral density to true value in the Frobenius norm) and graph recovery. Both synthetic and real data examples are presented in support of the proposed approaches. In synthetic data examples, our log-sum-penalized differential time-series graph estimator significantly outperformed our lasso based differential time-series graph estimator which, in turn, significantly outperformed an existing lasso-penalized i.i.d. modeling approach, with $F_1$ score as the performance metric.

Recently, there has been an explosion in statistical learning literature to represent data using topological principles to capture structure and relationships. We propose a topological data analysis (TDA)-based framework, named Topological Prototype Selector (TPS), for selecting representative subsets (prototypes) from large datasets. We demonstrate the effectiveness of TPS on simulated data under different data intrinsic characteristics, and compare TPS against other currently used prototype selection methods in real data settings. In all simulated and real data settings, TPS significantly preserves or improves classification performance while substantially reducing data size. These contributions advance both algorithmic and geometric aspects of prototype learning and offer practical tools for parallelized, interpretable, and efficient classification.

Abstract--Low-altitude wireless networks (LA WNs) represent a promising architecture that integrates unmanned aerial vehicles (UA Vs) as aerial nodes to provide enhanced coverage, reliability, and throughput for diverse applications. However, these networks face significant security vulnerabilities from both known and potential unknown eavesdroppers, which may threaten data confidentiality and system integrity. T o solve this critical issue, we propose a novel secure communication framework for LA WNs where the selected UA Vs within a swarm function as a virtual antenna array (V AA), complemented by intelligent reflecting surface (IRS) to create a robust defense against eavesdropping attacks. Specifically, we formulate a multi-objective optimization problem that simultaneously maximizes the secrecy rate while minimizing the maximum sidelobe level and total energy consumption, requiring joint optimization of UA V excitation current weights, flight trajectories, and IRS phase shifts. This problem presents significant difficulties due to the dynamic nature of the system and heterogeneous components. Thus, we first transform the problem into a heterogeneous Markov decision process (MDP). Then, we propose a heterogeneous multi-agent control approach (HMCA) that integrates a dedicated IRS control policy with a multi-agent soft actor-critic framework for UA V control, which enables coordinated operation across heterogeneous network elements. Simulation results show that the proposed HMCA achieves superior performance compared to baseline approaches in terms of secrecy rate improvement, sidelobe suppression, and energy efficiency. Furthermore, we find that the collaborative and passive beamforming synergy between V AA and IRS creates robust security guarantees when the number of UA Vs increases. Jiahui Li, Xinyue Liang, and Hui Kang are with the College of Computer Science and Technology, Jilin University, Changchun 130012, China (E-mails: lijiahui@jlu.edu.cn; Geng Sun is with the College of Computer Science and Technology, Jilin University, Changchun 130012, China, and also with the Key Laboratory of Symbolic Computation and Knowledge Engineering of Ministry of Education, Jilin University, Changchun 130012, China. He is also with the College of Computing and Data Science, Nanyang Technological University, Singapore 639798 (E-mail: sungeng@jlu.edu.cn).

Time series data often contain latent temporal structure, transitions between locally stationary regimes, repeated motifs, and bursts of variability, that are rarely leveraged in standard representation learning pipelines. Existing models typically operate on raw or fixed-window sequences, treating all time steps as equally informative, which leads to inefficiencies, poor robustness, and limited scalability in long or noisy sequences. We propose STaTS, a lightweight, unsupervised framework for Structure-Aware Temporal Summarization that adaptively compresses both univariate and multivariate time series into compact, information-preserving token sequences. STaTS detects change points across multiple temporal resolutions using a BIC-based statistical divergence criterion, then summarizes each segment using simple functions like the mean or generative models such as GMMs. This process achieves up to 30x sequence compression while retaining core temporal dynamics. STaTS operates as a model-agnostic preprocessor and can be integrated with existing unsupervised time series encoders without retraining. Extensive experiments on 150+ datasets, including classification tasks on the UCR-85, UCR-128, and UEA-30 archives, and forecasting on ETTh1 and ETTh2, ETTm1, and Electricity, demonstrate that STaTS enables 85-90\% of the full-model performance while offering dramatic reductions in computational cost. Moreover, STaTS improves robustness under noise and preserves discriminative structure, outperforming uniform and clustering-based compression baselines. These results position STaTS as a principled, general-purpose solution for efficient, structure-aware time series modeling.

We present a novel approach to compute three-dimensional Magnetohydrodynamic equilibria by parametrizing Fourier modes with artificial neural networks and compare it to equilibria computed by conventional solvers. The full nonlinear global force residual across the volume in real space is then minimized with first order optimizers. Already,we observe competitive computational cost to arrive at the same minimum residuals computed by existing codes. With increased computational cost,lower minima of the residual are achieved by the neural networks,establishing a new lower bound for the force residual. We use minimally complex neural networks,and we expect significant improvements for solving not only single equilibria with neural networks,but also for computing neural network models valid over continuous distributions of equilibria.

Accurate precipitation forecasting is indispensable in agriculture, disaster management, and sustainable strategies. However, predicting rainfall has been challenging due to the complexity of climate systems and the heterogeneous nature of multi-source observational data, including radar, satellite imagery, and surface-level measurements. The multi-source data vary in spatial and temporal resolution, and they carry domain-specific features, making it challenging for effective integration in conventional deep learning models. Previous research has explored various machine learning techniques for weather prediction; however, most struggle with the integration of data with heterogeneous modalities. To address these limitations, we propose an Adaptive Mixture of Experts (MoE) model tailored for precipitation rate prediction. Each expert within the model specializes in a specific modality or spatio-temporal pattern. We also incorporated a dynamic router that learns to assign inputs to the most relevant experts. Our results show that this modular design enhances predictive accuracy and interpretability. In addition to the modeling framework, we introduced an interactive web-based visualization tool that enables users to intuitively explore historical weather patterns over time and space. The tool was designed to support decision-making for stakeholders in climate-sensitive sectors. We evaluated our approach using a curated multimodal climate dataset capturing real-world conditions during Hurricane Ian in 2022. The benchmark results show that the Adaptive MoE significantly outperformed all the baselines.

Building Information Modeling (BIM) is essential for managing building data across the entire lifecycle, supporting tasks from design to maintenance. Natural Language Interface (NLI) systems are increasingly explored as user-friendly tools for information retrieval in Building Information Modeling (BIM) environments. Despite their potential, accurately extracting BIM-related data through natural language queries remains a persistent challenge due to the complexity use queries and specificity of domain knowledge. This study presents a comparative analysis of two prominent approaches for developing NLI-based BIM information retrieval systems: domain-specific fine-tuning and prompt-based learning using large language models (LLMs). A two-stage framework consisting of intent recognition and table-based question answering is implemented to evaluate the effectiveness of both approaches. To support this evaluation, a BIM-specific dataset of 1,740 annotated queries of varying types across 69 models is constructed. Experimental results show that domain-specific fine-tuning delivers superior performance in intent recognition tasks, while prompt-based learning, particularly with GPT-4o, shows strength in table-based question answering. Based on these findings, this study identify a hybrid configuration that combines fine-tuning for intent recognition with prompt-based learning for question answering, achieving more balanced and robust performance across tasks. This integrated approach is further tested through case studies involving BIM models of varying complexity. This study provides a systematic analysis of the strengths and limitations of each approach and discusses the applicability of the NLI to real-world BIM scenarios. The findings offer insights for researchers and practitioners in designing intelligent, language-driven BIM systems.

High-resolution imaging is crucial for enhancing visual clarity and enabling precise computer-assisted guidance in minimally invasive surgery (MIS). Despite the increasing adoption of 4K endoscopic systems, there remains a significant gap in publicly available native 4K datasets tailored specifically for robotic-assisted MIS. We introduce SurgiSR4K, the first publicly accessible surgical imaging and video dataset captured at a native 4K resolution, representing realistic conditions of robotic-assisted procedures. SurgiSR4K comprises diverse visual scenarios including specular reflections, tool occlusions, bleeding, and soft tissue deformations, meticulously designed to reflect common challenges faced during laparoscopic and robotic surgeries. This dataset opens up possibilities for a broad range of computer vision tasks that might benefit from high resolution data, such as super resolution (SR), smoke removal, surgical instrument detection, 3D tissue reconstruction, monocular depth estimation, instance segmentation, novel view synthesis, and vision-language model (VLM) development. SurgiSR4K provides a robust foundation for advancing research in high-resolution surgical imaging and fosters the development of intelligent imaging technologies aimed at enhancing performance, safety, and usability in image-guided robotic surgeries.

This study investigates the effectiveness of several machine learning algorithms for static malware detection using the EMBER dataset, which contains feature representations of Portable Executable (PE) files. We evaluate eight classification models: LightGBM, XGBoost, CatBoost, Random Forest, Extra Trees, HistGradientBoosting, k-Nearest Neighbors (KNN), and TabNet, under three preprocessing settings: original feature space, Principal Component Analysis (PCA), and Linear Discriminant Analysis (LDA). The models are assessed on accuracy, precision, recall, F1 score, and AUC to examine both predictive performance and robustness. Ensemble methods, especially LightGBM and XGBoost, show the best overall performance across all configurations, with minimal sensitivity to PCA and consistent generalization. LDA improves KNN performance but significantly reduces accuracy for boosting models. TabNet, while promising in theory, underperformed under feature reduction, likely due to architectural sensitivity to input structure. The analysis is supported by detailed exploratory data analysis (EDA), including mutual information ranking, PCA or t-SNE visualizations, and outlier detection using Isolation Forest and Local Outlier Factor (LOF), which confirm the discriminatory capacity of key features in the EMBER dataset. The results suggest that boosting models remain the most reliable choice for high-dimensional static malware detection, and that dimensionality reduction should be applied selectively based on model type. This work provides a benchmark for comparing classification models and preprocessing strategies in malware detection tasks and contributes insights that can guide future system development and real-world deployment.